For robot makers · Product safety · United States

Consumer robot recalls in the US: CPSC Section 15(b) reporting and what your service partner should be ready for

· 13 min read

Short answer: a robot vacuum, robotic lawn mower, pool robot or companion/educational humanoid sold for household or personal use is usually a "consumer product" under the US Consumer Product Safety Act (CPSA). Once the manufacturer (importers count as manufacturers), a distributor or a retailer obtains information that reasonably supports the conclusion that the product has a defect that could create a substantial product hazard, or creates an unreasonable risk of serious injury or death, Section 15(b) requires it to inform the Consumer Product Safety Commission (CPSC) "immediately". CPSC's rules define that as within 24 hours, after an investigation that should normally take no more than 10 days, with weekends and holidays excluded. Most cases then become voluntary recalls under a corrective action plan (CAP) that names the remedy: refund, repair or replacement.

For robot makers shipping from China, the risk is rarely the report itself. It is information stuck in transit: a US customer complaint, or a service ticket that says "battery swollen" or "dock hot to the touch", passing through support, a dealer, a service partner and the factory while the clock is already running. And once a recall starts, someone has to find every unit by serial number, send people to swap parts or update firmware, and bring damaged batteries back legally. That is the after-sales side's job, and it has to be ready before the first incident.

This note follows 15 U.S.C., 16 CFR Parts 1115 and 1116, CPSC guidance and Canada's Consumer Product Safety Act (CCPSA), checked on 2026-11-15. Points marked "our reading" or "our suggestion" are interpretation. This is not legal advice; whether and how to report is a question for a US product safety lawyer. For the insurance side, see robot product liability insurance in North America.

First: is your robot a consumer product?

The CPSA definition (15 U.S.C. 2052(a)(5)) covers any article, or component part, produced or distributed for sale to a consumer for use in or around a household or residence, a school, in recreation or otherwise, or for a consumer's personal use. The first exclusion is an article "not customarily produced or distributed for sale to, or use or consumption by, or enjoyment of, a consumer"; the others are tobacco, motor vehicles, pesticides, firearms, aircraft, boats, drugs and devices, cosmetics and food.

  • Robot vacuums, robotic lawn mowers, pool robots: consumer products. CPSC has announced recalls of robotic mowers and pool-cleaning robots in recent years (examples below).
  • Companion, educational and entertainment humanoids and quadrupeds sold to households, schools and individuals: consumer products by the definition.
  • Commercial floor scrubbers, warehouse AMRs, industrial arms sold only to businesses: our reading is that they may fall under the first exclusion, but not if the same model is also commonly sold to consumers. That is a case-by-case question.

Component parts count too: a charging dock, battery pack or power adapter can trigger the same duties.

Section 15(b): who reports, and when

Who: every manufacturer, distributor and retailer of the consumer product (15 U.S.C. 2064(b)). 16 CFR 1115.3(f) calls them "subject firms" and says a manufacturer includes an importer. The company acting as importer in the US, often the maker's US subsidiary or an importer of record, is first in line.

Four triggers. Report when information reasonably supports the conclusion that the product:

  1. fails to comply with an applicable consumer product safety rule, or a voluntary standard CPSC has relied on;
  2. fails to comply with any other rule, regulation, standard or ban enforced by CPSC;
  3. contains a defect which could create a substantial product hazard; or
  4. creates an unreasonable risk of serious injury or death.

The only exception: actual knowledge that CPSC has already been adequately informed.

Points that are easy to get wrong:

  • A product built exactly as designed can still be defective (16 CFR 1115.4), for example through inadequate instructions or warnings, and the rule urges firms to report "if in doubt".
  • Don't wait for an injury. Firms with information indicating an unreasonable risk of serious injury or death "should not wait for such serious injury or death to actually occur" (1115.6(a)).
  • "Serious injury" is broad. 1115.6(c) lists fractures, lacerations requiring sutures, concussions, eye, ear or internal injuries requiring treatment, and injuries causing more than one day away from school or work.
  • One unit can be enough: "Even one defective product can present a substantial risk of injury" (1115.12(g)).
  • Reporting is not an admission. A firm need not admit, and may deny, that the information supports a reportable conclusion (1115.12(a)).
  • Information from outside the US counts when it is relevant to products sold in the US (1115.12(f)). The same model failing in China or Europe is not somebody else's problem.

When does the 24-hour clock start?

CPSC's own guidance says a company "must report to the Commission within 24 hours of obtaining reportable information". The rules split the timeline (16 CFR 1115.11, 1115.14):

StepWhat the rule saysWhat it means for after-sales
When the firm "knows"When an official or employee who may reasonably be expected to appreciate its significance receives the information (1115.11(a))A US support agent, service manager or technician receiving a complaint may be enough
Reaching the right personNormally no more than 5 days to reach the CEO or responsible official (1115.14(b))A ticket sitting unread for a week is not an excuse
InvestigationShould not exceed 10 days unless a longer period is shown to be reasonable (1115.14(d))Get the failed part, logs, photos and an engineering view within 10 days
Report"Immediately, that is, within 24 hours" once information reasonably supports the conclusion (1115.14(e))Don't wait for complete risk estimates (1115.14(c)) or certainty (1115.12(a))
CountingWeekends and holidays excluded (1115.14(a))—

1115.12(f) lists the information firms should study: engineering, quality control and production data; safety-related design changes; product liability suits and claims; independent test results; consumer complaints; information from CPSC or other agencies; and requests to return a product or for replacement or credit. In other words, service tickets, returns and dealer feedback are Section 15(b) information.

What goes into the report, and where it goes

The initial report (1115.13(c)) has six items: product identification and description; the manufacturer's or importer's name and address; the nature and extent of the possible defect, noncompliance or risk; the nature and extent of injury or risk of injury; the reporter's name and address; and whatever full-report information is available. A non-written report should be confirmed in writing within 48 hours, and a written report should be signed by the CEO unless authority has been delegated in writing. A full report (1115.13(d)) follows and is updated as new information arrives.

Where: CPSC's Section 15 online reporting system on saferproducts.gov, or Section15@cpsc.gov. Distributors and retailers that are not manufacturers or importers can use the simpler route in 1115.13(b) (1115.10(e)).

Confidentiality: under 15 U.S.C. 2055(b)(5), CPSC generally does not disclose Section 15(b) submissions unless a complaint has been filed, the firm has accepted a remedial settlement, the firm agrees, or public health and safety requires it. Before releasing information that identifies a manufacturer, CPSC must, to the extent practicable, give at least 15 days' notice and a summary (2055(b)(1)).

Fast Track and the corrective action plan

Most recalls are voluntary recalls agreed with CPSC. Under CPSC's current recall handbook, if a company reports a potential defect, stops sales immediately, agrees to announce a recall publicly, and provides a full report and a CAP, staff will not make a preliminary determination that the product creates a substantial product hazard. This is the Fast Track program; CPSC's Fast Track Q&A asks for a CAP "ready to be implemented within 20 working days". Fast Track is a CPSC procedure, not a CFR rule.

A CAP is a document signed by the firm setting out the remedial action it will voluntarily take, with no legally binding effect (16 CFR 1115.20(a)). Of its 14 items, these land on after-sales:

  • the affected models and how to identify them (model, serial number, production dates);
  • the remedy: repair, replacement or refund, the three categories the handbook uses;
  • what consumers should do until the product is corrected (stop using it, unplug the dock);
  • what happens to inventory in the distribution chain, and the timetable;
  • CPSC monitoring of the recall, with customer lists and other information provided;
  • how the problem will be prevented from recurring.

Public CPSC recall notices show the usual remedies (examples only, no comment on the products):

NoticeProduct typeHazardRemedy
CPSC 22-727 (Feb 2022)Robotic lawn mower, about 1,400 unitsLithium-ion battery can overheatRepair: free software update pushed to units; heavily cycled units also get a free replacement battery
CPSC 23-158 (Mar 2023)Docking station for a robotic mower, about 2,700 unitsMoisture can short the circuit boardRepair: free at-home repair by the maker or an authorized servicing dealer
CPSC 26-372 (Apr 2026)Pool-cleaning robot, about 5,000 unitsLithium-ion battery can overheatReplacement: free new unit

Each remedy asks something different of after-sales: a software fix needs remote push and proof that every unit took it; an at-home repair needs people, parts and scheduling; a replacement needs a return and recycling route for old units and batteries.

What failing to report costs

Failing to inform CPSC immediately and adequately is a prohibited act under CPSA Section 19(a)(4) (16 CFR 1115.22(b)). Current maximum civil penalties are USD 120,000 per violation and USD 17.15 million for a related series (86 FR 68244, applicable from January 1, 2022; the statute requires an adjustment every five years, the next expected to apply from 2027; check CPSC's notice). Separately, Section 37 requires a manufacturer to report within 30 days after the last of three civil actions over the same model, alleging death or grievous bodily injury, ends in settlement or judgment for the plaintiff within a 24-month period (16 CFR 1116.3, 1116.5(a)).

Seven things the after-sales side should have ready

Our suggestions, in the order you need them before anything happens:

  1. Serial number traceability: serial number, production batch, who bought it (dealer or end user), where it is installed and a contact, in one table. Recall scope follows batches; units you can't find can't be notified, and you can't report completion rates.
  2. A safety escalation path for tickets: a "safety" flag in the service ticket (fire, smoke, burn, shock, pinch, swollen battery, hot dock) that sends the ticket the same day to your named product safety owner, outside the normal repair queue. Put the hand-off deadline and contact in your service partner and dealer contracts. Our reading: a repair-only service provider is not one of the reporters named in 15(b), but what it forwards to you can start your 10-day and 24-hour clocks.
  3. Evidence retention: don't scrap or ship home a unit involved in a safety incident on your own. Photograph it, record serial number and firmware version, pull logs, bag and tag the failed part, and wait for engineering and legal. Quarantine damaged batteries as dangerous goods.
  4. A remedy you can deliver: before a CAP says "at-home repair", count the units, the cities, the labour hours per unit and the parts; a software fix needs version confirmation per unit; a replacement needs a plan for the old units.
  5. A route for damaged batteries: damaged lithium-ion batteries cannot fly; US ground shipment follows 49 CFR 173.185(f) packaging and marking. Recalled batteries are usually recycled locally rather than shipped back to China in bulk. See robot warranty and RMA in North America for return logistics.
  6. Recall records: notification date, correction date, remedy and where the removed part went, per unit. The CAP gives CPSC the right to monitor and ask for progress, so keep the data ready. The free service ticket and RMA template works with one extra "recall number" column.
  7. Ask about insurance early: whether your policies pay for notification, visits and replacements in a recall, and whether separate recall cover makes sense, is a question for your broker.

Canada: incidents within two days

Canada's Consumer Product Safety Act defines a consumer product as one "that may reasonably be expected to be obtained by an individual to be used for non-commercial purposes", including components, accessories and packaging. Section 14's "incident" is more specific than the US triggers: an occurrence in Canada or elsewhere that resulted, or may reasonably have been expected to result, in death or serious adverse health effects including serious injury; a defect or characteristic that may reasonably be expected to do so; incorrect, insufficient or missing labels or instructions; and a recall or measure started for health or safety reasons by a foreign entity, a province or certain other bodies. Anyone who manufactures, imports or sells the product for commercial purposes must give the Minister of Health the information in their control within two days of becoming aware, and where applicable tell the person they got the product from; the manufacturer, or the importer if the manufacturer carries on business outside Canada, must file a written report within 10 days. Section 13 requires supplier and customer records kept for six years (retailers record their supplier and where and when they sold), and section 31 lets the Minister order a recall. Reports go through Health Canada's "Incident Report for Industry" form. A US recall can itself be a reportable incident in Canada.

What KeepRobots can do

KeepRobots is a robot field service company in Vancouver. We don't make robots and are not an exclusive agent for any brand; in Canada we also sell robots from selected brands (Booster Robotics and SENAD, see our robot shop), and we service robots of any make. We don't give legal advice or decide whether you must report to CPSC or Health Canada; that belongs to your product safety owner and your lawyer. Around recalls and safety incidents, we can:

  • do a first on-site inspection of a safety incident in Canada or the US: photos, serial number and firmware version, logs, bag and tag the failed part, and send the record to your named contact the same day
  • carry out your recall remedy on site: swap parts, repair, update firmware, logging the result unit by unit and keeping a progress sheet for you
  • hold recall parts and returned units in Vancouver, quarantine damaged batteries and arrange local recycling
  • work in Chinese and English: our engineers read Chinese technical documents and can join calls during China working hours

Current rates, before tax: diagnostic C$200 in Canada or US$200 in the US, per robot, per visit, credited if you approve the repair; C$100 call-out in the Greater Vancouver core zone; on-site labour C$150/hour in Canada or US$150/hour in the US; travel outside the core zone and for US projects quoted per project. See robot repair and field service in the USA, or write to partners@keeprobots.com.

FAQ

Who has to report a robot vacuum safety problem to CPSC?

Under 15 U.S.C. 2064(b), every manufacturer, distributor and retailer of the consumer product, and 16 CFR 1115.3(f) counts importers as manufacturers. The US importer, often the maker's US subsidiary, is first in line; dealers and retailers must report too unless they actually know CPSC has been adequately informed.

When does the 24-hour reporting deadline start?

When the firm obtains information that reasonably supports a reportable conclusion (16 CFR 1115.14(e)), with weekends and holidays excluded. An investigation before that should normally take no more than 10 days (1115.14(d)), and information should reach the responsible official within about 5 days (1115.14(b)). An employee receiving a complaint can count as the firm knowing (1115.11(a)).

Can we wait until we are sure it is a defect?

The rules say not to: don't delay to reach certainty (1115.12(a)), don't wait for complete risk estimates (1115.14(c)), and report if in doubt (1115.4). A report need not admit a defect. Ask a US product safety lawyer about your case.

What is a CPSC Fast Track recall?

A CPSC procedure, not a CFR rule. Under the current recall handbook, if a firm reports a potential defect, stops sales, agrees to a public recall and submits a full report and corrective action plan, staff will not make a preliminary hazard determination. CPSC's Fast Track Q&A asks for a CAP ready to be implemented within 20 working days, naming repair, replacement or refund.

What are the penalties for not reporting?

Failing to report is a prohibited act (16 CFR 1115.22(b)). Current maximum civil penalties are USD 120,000 per violation and USD 17.15 million for a related series (applicable since January 1, 2022, adjusted every five years).

Does Canada have a similar rule?

Yes. Under section 14 of the Canada Consumer Product Safety Act, manufacturers, importers and sellers must report an incident to Health Canada within two days of becoming aware; the manufacturer, or the importer if the manufacturer is outside Canada, files a written report within 10 days. A recall started abroad for safety reasons is itself an incident.

What can KeepRobots do, and what does it cost?

We don't give legal advice. We can inspect safety incidents on site in Canada and the US, carry out recall repairs, part swaps and firmware updates unit by unit, and hold recall parts and quarantine damaged batteries in Vancouver. We also sell selected brands in Canada and service any make. Rates before tax: diagnostic C$200 in Canada or US$200 in the US, per robot, per visit, credited if the repair is approved; C$100 Greater Vancouver call-out; labour C$150/hour in Canada or US$150/hour in the US; travel outside the core zone and US projects quoted per project.

Sources (checked 2026-11-15)

  • 15 U.S.C. 2064 (CPSA Section 15, including 15(b)): govinfo.gov
  • 15 U.S.C. 2052(a)(5) (consumer product definition): govinfo.gov
  • 15 U.S.C. 2055 (public disclosure): govinfo.gov
  • 15 U.S.C. 2069 (civil penalties): govinfo.gov
  • 16 CFR Part 1115 (substantial product hazard reports): ecfr.gov
  • 16 CFR Part 1116 (Section 37 lawsuit reports): ecfr.gov
  • CPSC civil penalties, adjusted maximum amounts (86 FR 68244): federalregister.gov
  • CPSC, Duty to Report: cpsc.gov
  • CPSC, Fast Track Questions: cpsc.gov
  • CPSC, Product Safety Planning, Reporting, and Recall Handbook: cpsc.gov (PDF)
  • CPSC Section 15 online reporting: saferproducts.gov
  • 49 CFR 173.185 (lithium batteries; (f) damaged batteries): ecfr.gov
  • Canada Consumer Product Safety Act, S.C. 2010, c. 21 (ss. 2, 13, 14, 31, 32): laws-lois.justice.gc.ca
  • Health Canada, report an incident (industry): canada.ca
  • Rules checked on 2026-11-15 and subject to change (CPSC penalty amounts may be adjusted around December 2026). General information, not legal advice. Recall notices are cited as examples of remedies only, with no comment on the products. KeepRobots does not provide legal services. Rates are KeepRobots' current published rates, before tax, and may change.

中文版:消费级机器人在美国出了安全问题怎么办:CPSC 报告义务、召回流程和售后要准备什么

← Field notes

Want a local service point in North America?

Tell us your product, where your customers are and what you need. We reply within one business day, in English or Chinese.