For robot makers · Field service · United States

Robot field service in California from Vancouver: travel, border rules and cost for LA and the Bay Area

· 11 min read

Short answer: Yes, a Vancouver team can do on-site robot work in Los Angeles, the San Francisco Bay Area and the rest of California, on planned trips. Both metro areas have nonstop flights from Vancouver: roughly 2–2½ hours to San Francisco (SFO) and about 3 hours to Los Angeles (LAX), and US border inspection happens in Vancouver before boarding. The border rules are the same as for Seattle: Canadian citizens can do after-sales service when the robot was made and bought outside the US and the work falls under the warranty or service contract that came with the sale. California adds its own rules on contractor licensing, Cal/OSHA lockout/tagout and sales tax on parts. At KeepRobots' current US rates (before tax), the diagnostic fee is US$200 per robot, per visit, credited if you approve the repair; on-site labour is US$150 per hour; flights, hotel, car and border time are quoted per project before anyone travels.

This page is for robot makers, especially makers based outside North America, whose customers are in Southern California or the Bay Area: warehouses, hospitals, hotels, restaurants, labs and factories. Rules are summarised from the official texts listed at the end, checked on 2026-11-12. This is not legal, tax or immigration advice; at the border the officer decides. For Washington and Oregon, see robot field service in Seattle and the Pacific Northwest.

Getting there: flights, preclearance and time

Metro areaAirport from Vancouver (YVR)Scheduled flight time (approx.)Notes
Los Angeles / Southern CaliforniaLAX, nonstopAbout 3 hoursSeveral daily nonstops by Canadian and US airlines; sites in Orange County or the Inland Empire add a drive from LAX
San Francisco Bay Area / Silicon ValleySFO, nonstopAbout 2–2½ hoursSouth Bay and East Bay sites are a drive from SFO; we found no nonstop from YVR to San Jose or Oakland
San DiegoSAN, nonstopAbout 3 hoursFewer flights; check the schedule when quoting

Flight times are approximate scheduled times from published timetables and change by season and airline; we check the actual routes when we quote. Los Angeles and the Bay Area are roughly 600 km apart by road, so a trip covering both is usually a short domestic flight between them rather than a drive.

Preclearance. Vancouver International Airport is one of the Canadian airports where US Customs and Border Protection officers "inspect travelers prior to boarding U.S.-bound flights". The engineer clears US immigration and customs in Vancouver, including the after-sales paperwork described below, and lands in California as a domestic passenger. If the officer refuses entry, the engineer has not flown yet, which is a much cheaper failure than a refusal on arrival.

Time zones. British Columbia stays on UTC-7 all year from November 2026. California observes Pacific Time (UTC-8 in winter, UTC-7 in summer), so Vancouver is one hour ahead of Los Angeles and San Francisco from November to mid-March and on the same clock in summer. Bookings are made in the site's local time.

Can a Canadian engineer repair robots in California?

The same two federal texts apply as anywhere in the US; they are explained in detail in the Pacific Northwest guide.

  • Canadian citizens, 8 CFR 214.2(b)(4)(i)(F), after-sales services: repair and maintenance personnel "performing services or training workers to perform services, pursuant to a warranty or other service contract incidental to the sale of commercial or industrial equipment or machinery … purchased from an enterprise located outside the United States, during the life of the warranty or service agreement".
  • B-1 visa, 9 FAM 402.2-5(E)(1): the contract of sale must specifically require the seller to provide the service; the person must have unique knowledge essential to that obligation and must not be paid from a US source. Building and construction work is excluded.

In practice: a robot sold to a California customer by the maker's non-US company, with a warranty or service contract in the sale, and the maker paying for the visit, is the closest fit. A robot bought from a US distributor or the maker's US subsidiary, an expired warranty, or a customer paying the engineer directly usually points to a US-based provider. We check this with the maker before booking, and say so when a job doesn't fit.

California-specific things to check

Contractor licensing (CSLB)

California licenses work by what it does to the building, not by whether it involves a robot. Business and Professions Code section 7026 defines a contractor broadly, including anyone who builds, alters or repairs a structure "or any part thereof". Section 7045 exempts the sale or installation of finished products that do not become a fixed part of the structure, and section 7048 exempts minor work under US$1,000 in total (labour and materials) that needs no building permit, but only if the person doing it has no employees on the job. Electrical work is licensed separately as C-10. Our reading (not a ruling): repairing or maintaining a free-standing robot that plugs into an existing outlet is equipment service, while anchoring a robot cell, hard-wiring, or adding circuits is work for a licensed California contractor or electrician. When a job includes that kind of work, we coordinate with local licensed trades rather than do it ourselves.

Cal/OSHA lockout/tagout

California runs its own occupational safety plan, which covers "all private-sector places of employment within the state", so Cal/OSHA rules apply rather than only federal OSHA. Title 8 section 3314 covers "the cleaning, repairing, servicing, setting-up and adjusting of machines and equipment" where unexpected start-up or stored energy could injure someone, and requires written hazardous energy control procedures. Note subsection (k): "Whenever outside servicing personnel are to be engaged in activities covered by this section, the on-site employer's lockout or tagout procedures shall be followed." So the customer's procedure governs, and the engineer needs to see it before starting work. Having the robot's own energy isolation steps written in English helps the customer's EHS team approve the job.

Sales tax: itemise parts and labour

California's tax agency (CDTFA) says "tax generally does not apply to your itemized charges for repair labor", while replacement parts are taxable. Under Regulation 1546, when parts are billed separately (or are more than 10% of the total), the repairer is treated as the retailer of the parts. Who registers and collects is a question for your tax adviser; the practical rule is to show parts, labour, diagnostics and travel as separate lines on every California invoice. Other states differ: Washington and Texas, for example, tax many repair services.

Customer site paperwork

Large California sites usually ask for a certificate of insurance with additional insured endorsements, workers' compensation evidence, a vendor tax form and a safety orientation before the first visit. The full list is in before a robot technician works on a US customer site.

Parts for a California repair

Replacement parts are imports into the US, even in an engineer's luggage. The simplest route is usually to ship the part from the maker straight to the California site under the maker's RMA process and customs broker, so it is there when the engineer arrives, and to send failed parts back the same way. Lithium batteries have their own shipping rules. Duty on parts and on robots returned for repair is covered in how much robot repair costs in North America.

What a California visit costs

  • Diagnostic: US$200 per robot, per visit, credited in full against that robot's repair if you approve the work.
  • On-site labour: US$150 per hour.
  • Travel: quoted per project: flights, hotel, rental car or rides, and travel time. You approve the quote before anything is booked.
  • All prices are before tax; parts are extra. Remote triage before the trip is free and is the main way to avoid a second flight.
Example (before tax, parts extra)CalculationExample total
Los Angeles, 1 robot, repair approved, 3 h on site3 × $150 (US$200 diagnostic credited)US$450 + travel quoted per project
Bay Area, 1 robot, you decide not to repair after diagnosis$200 diagnostic, not creditedUS$200 + travel
One trip: 2 sites in LA and 1 in the Bay Area, 4 robots approved, 10 h in total10 × $150 (all diagnostics credited)US$1,500 + one shared travel quote

Hours in these examples are assumptions to show the arithmetic, not records from specific jobs. Because every California visit includes a flight, grouping work is what keeps the cost per robot down: planned maintenance at several sites, or a deployment plus nearby repairs, on one trip.

When a California-based provider is the better choice

  • The robots were bought through a US company, or the warranty has ended.
  • Your customer contract promises same-day or next-morning on-site response in Los Angeles or the Bay Area. A team that flies in cannot promise that reliably.
  • The job is mostly licensed construction or electrical work.
  • One metro area already produces enough hours to keep a local technician busy; then local hiring or contracting usually costs less than flights.

Many makers combine both: a local or nationwide provider for urgent calls, and a partner like us for deployments, planned maintenance trips, spare parts held in Vancouver and engineers who can work from the factory's Chinese documentation. The trade-offs are compared in nationwide service network vs a dedicated field service partner, and US providers are listed in robot field service companies in the USA.

What KeepRobots can do

KeepRobots is a robot field service company in Vancouver, serving Canada and the United States in English and Mandarin. We don't make robots and are not an exclusive agent for any brand; in Canada we also sell robots from selected brands (Booster Robotics and SENAD), and we service robots of any make. For makers with customers in California, we can check before booking whether each job fits the after-sales rules, plan trips that group several sites, hold spare parts in Vancouver, follow the customer's lockout/tagout procedure and your fault tree, RMA process and report template, and coordinate licensed local trades when a job needs them. Our engineers read Chinese technical documents and can join calls with your factory team during their working hours. Travel times to other US cities and our US rates are on robot repair and field service in the USA; general repair and maintenance scope is on robot repair and maintenance.

To check whether your California customers fit this model, email partners@keeprobots.com with the robot model, where the robots were bought, the warranty terms and the cities involved.

Full roadmap: How to expand a robot company into North America.

FAQ

Can a robot repair company in Vancouver serve customers in Los Angeles or San Francisco?

Yes, on planned trips. There are nonstop flights from Vancouver to LAX (about 3 hours) and SFO (about 2–2½ hours), with US preclearance in Vancouver. Canadian citizens can do after-sales repair under 8 CFR 214.2(b)(4)(i)(F) when the robot was made and bought outside the US and the work falls under the warranty or service contract from the sale. Other jobs belong with a US-based provider. The border officer decides.

Does a robot technician need a California contractor licence?

Not for servicing a free-standing robot as such, in our reading: California licensing follows the building work, and Business and Professions Code section 7045 exempts finished products that do not become a fixed part of the structure. Anchoring, hard-wiring or adding circuits is contractor or C-10 electrical work and should be done by a licensed California contractor. This is not a legal opinion; check with CSLB or a California lawyer for a specific job.

Whose lockout/tagout procedure applies on a California site?

The customer's. Cal/OSHA Title 8 section 3314(k) says that when outside servicing personnel do covered work, "the on-site employer's lockout or tagout procedures shall be followed." Ask for the procedure before the visit and bring the robot's own energy isolation steps in English.

Is robot repair labour taxed in California?

Generally not, if it is itemised: CDTFA says tax generally does not apply to itemized charges for repair labor, while parts are taxable. Show parts and labour as separate invoice lines and ask a tax adviser who should register and collect. Washington and Texas tax many repair services.

How much does KeepRobots charge for robot repair in California?

Before tax: diagnostic US$200 per robot, per visit, credited if you approve the repair; on-site labour US$150 per hour; flights, hotel, car and travel time quoted per project and approved before anything is booked. Parts are extra.

How fast can you be on site in Los Angeles or the Bay Area?

We confirm the date in writing for each job rather than promise a blanket response time; it depends on flights, parts and whether the job fits the after-sales rules. For contracts that need same-day response, a California-based provider is the better fit.

中文版:美国加州(洛杉矶、湾区)机器人上门维修:从温哥华怎么去、要多久、怎么收费

Sources (checked 2026-11-12)

  • US eCFR, 8 CFR 214.2(b)(4)(i)(F), USMCA after-sales services: ecfr.gov
  • US Department of State, 9 FAM 402.2-5(E)(1), Commercial or Industrial Workers: fam.state.gov
  • US Customs and Border Protection, Preclearance locations: cbp.gov
  • BC Government News, B.C. moves to permanent daylight time: news.gov.bc.ca
  • California Business and Professions Code section 7045 (and 7026, 7048): california.public.law
  • CSLB Industry Bulletin 24-07, minor work exemption (AB 2622): cslb.ca.gov
  • CSLB, C-10 Electrical classification: cslb.ca.gov
  • OSHA, California State Plan: osha.gov
  • California Code of Regulations, Title 8 section 3314, hazardous energy control: dir.ca.gov
  • CDTFA Publication 108, Labor Charges, Nontaxable Charges: cdtfa.ca.gov
  • CDTFA Regulation 1546, Installing, Repairing, Reconditioning in General: cdtfa.ca.gov
  • KeepRobots current US rates and travel times: robot repair and field service in the USA

Example totals use KeepRobots' current published US rates as of 2026-11-12, before tax and parts, and may change; hours in the examples are assumptions. Flight times are approximate and change with airline schedules. Immigration, licensing and tax rules are summarised for orientation only; confirm with an immigration lawyer, California licensed professional or tax adviser.

← Field notes

Want a local service point in North America?

Tell us your product, where your customers are and what you need. We reply within one business day, in English or Chinese.