For robot makers · Spare parts · Customs

Moving robot spare parts between the US and Canada: customs, origin, repair-and-return and duties

· 13 min read

Short answer: every time a robot spare part crosses the US-Canada border it is a new import, and the duty depends on where the part was made, not which warehouse it ships from. A motor made in China that sat in a Vancouver warehouse is still a Chinese part: shipped to a US customer it pays the normal US duty plus the Section 301 tariffs on Chinese goods, and CUSMA (USMCA) gives no relief. Going the other way, a Chinese part shipped from a US warehouse to a Canadian customer enters Canada at the normal (MFN) rate, which is zero for most robot parts and 7% for a lithium-ion battery pack shipped on its own, plus 5% GST. Repairs are the exception, and a generous one: a failed part sent from Canada to the US for repair comes back duty-free under Canadian tariff item 9992.00.00 whatever its origin, and a US part repaired in Canada comes back free of normal US duty, though the 2026 Section 301 "forced labor" tariff still applies to the value of the repair. All of it depends on paperwork made before the part leaves: proof of export, the serial number and a repair invoice that says what was done and what it cost. If you need stock on both sides, the simplest setup is usually to ship from China to each country separately and keep two small stocks.

This is written for robot makers, especially makers in China, that already have customers in North America and now need spare parts and repairs on both sides of the border: after-sales, supply chain and trade compliance managers. KeepRobots is a robot field service company in Vancouver; we are not a customs broker and we don't act as importer of record. Rules and rates below are from the official texts, checked on November 15, 2026 (sources at the end). US tariffs changed several times in 2026, so have a licensed customs broker confirm every shipment against the rules on the day. This is not customs, tax or legal advice. How a Chinese part enters Canada the first time (importer, CARM, GST) and how consignment stock works is in robot spare parts consignment in Canada; tariffs on whole robots entering the US are in tariffs on Chinese-made robots in the US (2026).

First, which kind of "transfer" is it?

"Sending a part from Canada to the US" can be four different things to customs, with very different rules and costs:

CaseWhat customs seesWhat sets the dutyKey documents
1. A new part from a Canadian warehouse to a US customer (replacement or sale)A formal US importOrigin: a Chinese part pays US duty and the extra tariffs on Chinese goodsCommercial invoice with country of origin; US entry
2. A new part from a US warehouse to a Canadian customerA formal Canadian importChinese parts: Canadian MFN rate. US-made parts: also check Canada's 2026 surtax on US goodsCommercial invoice; Canadian entry (CARM)
3. A failed part sent to the other country for repair and returnedExport for repair, then re-importBetween the US and Canada, both sides have origin-blind duty relief for repairsProof of export, serial number, repair invoice, repairer's declaration
4. A failed part from the other country brought in for repair and sent backTemporary import for repairCanada 9993.00.00; US temporary importation under bond (9813.00.05)Canada: form BSF865; US: TIB bond

Origin: a Chinese part stored in Canada is still a Chinese part

  • Storage doesn't change origin. Under CUSMA Article 4.2 a good is originating if it is wholly obtained or produced in the region, or produced there from non-originating materials that meet the product-specific rule in Annex 4-B. The transit and transshipment rule in Article 4.18 only protects goods that are already originating. Storing, labelling and picking a part in Vancouver is not production, so a part made in China doesn't become a CUSMA part by sitting there. (That is our reading of the text; neither CBSA nor CBP has published guidance on this exact case.)
  • The US test. Under 19 CFR 134.1(b), processing in a third country changes the country of origin only if it is a "substantial transformation"; for goods from CUSMA countries the Part 102 rules apply (19 CFR 102.11: wholly obtained, or each foreign material undergoes the specified tariff shift). A Chinese part that was only stored or repacked is still of Chinese origin.
  • Assembly can be different, but get a ruling first. The Annex 4-B rule for 8479.50 (industrial robots) is a change from any other subheading with no regional value content; for 8479.90 parts it is a change from any other heading. On its face, assembling a robot in Canada from Chinese parts could meet the tariff shift, but which subheadings apply and whether the work counts as production is for a broker to judge, ideally with an advance ruling from CBSA or CBP. This is our reading, not an official ruling.
  • Spares packed with a robot follow the robot; spares shipped alone don't. Under Article 4.14, accessories, spare parts and tools delivered with a good, classified with it, not invoiced separately and customary in type, quantity and value share the good's origin. A spare part shipped and invoiced on its own has to meet the rules of origin by itself.
  • If you do claim CUSMA: the importer, exporter or producer can complete the certification of origin. It has no set form but must contain the minimum data elements in Annex 5-A, and it can't be on an invoice issued in a non-party country such as China (Article 5.2). One certification can cover multiple shipments of identical goods for up to 12 months. The importer needs it in hand when claiming. Records: at least 5 years for the US importer (19 CFR 182.15), 6 years in Canada (CBSA D11-4-2).

Case 1: Canadian warehouse to a US customer

As of November 15, 2026, a robot part of Chinese origin entering the US can pay these layers on top of the normal duty. Whether each one applies, and under which HTSUS number, is for the broker to check in Chapter 99 on the day of entry.

MeasureStatus (Nov 15, 2026)What it means for robot parts
Section 301, 2018 listsIn force; USTR confirmed in October 2026 that the actions continue. 178 exclusions were extended to January 9, 2027, but none covers robot or robot part subheadings such as 8479.50 or 8479.90.95List 1 (25%) includes 8479.50 industrial robots and robot parts under 8479.90 (check the current subheading, now 8479.90.95). Lithium-ion batteries for non-EV use (8507.60) went to 25% in 2026
Section 301 "forced labor" duties (from July 24, 2026)12.5% on goods of China, stacked on top8479.50, 8479.90 and 8507.60 are not in the exemptions (computers under 8471 are). Goods paying the Section 232 steel or aluminum derivative duty don't pay this layer
Section 232 steel and aluminum derivativesApplies only when steel (or aluminum) is at least 15% of the good's weight; on the full value; fixed industrial machinery at a combined 15% until December 31, 20278479.90.95 parts and 8428.70 handling robots are on the steel derivatives list; 8479.50 robots are not. A part with 15%+ steel by weight pays the 232 rate (15% combined) plus the 25% from 2018, about 40%; otherwise 25% + 12.5% = 37.5%. Have the steel weight share of each part number ready for the broker
Section 232 on robotics and industrial machineryProclamation 11077 of October 28, 2026 (91 FR 69199): no new tariff for now; negotiations, with a report within 180 daysCovers robots, industrial machinery and their parts from any country. Could change in 2027
IEEPA tariffs (fentanyl, reciprocal)Ended after the Supreme Court ruled on February 20, 2026 that IEEPA doesn't authorize tariffs; refunds through CBP's CAPENo longer collected
Measures on goods of Canada onlySection 301 forced labor duty of 10% on goods of Canada (USMCA duty-free entries exempt); Section 338 duties of 50% on listed Canadian goods from August 22, 2026, list last changed October 30, 2026, with no USMCA exemption (repairs entered under 9802 pay on the repair value)Only Canadian-origin goods; a Chinese part stored in Canada is not affected. In the current HTSUS the 338 list does not include 8479.50, 8479.90, 8428.70 or 8507, but it does include some programmable controllers under 8537.10.91. A robot or controller made in Canada has to be checked against the list on the day
US$800 de minimisSuspended for all countries since August 29, 2025; suspended indefinitely for all channels (postal from July 24, 2026 under a separate rule); repealed by law from July 1, 2027Splitting parts into small courier parcels no longer avoids duty
  • Who imports. The importer of record can be the US customer or your US entity, with a licensed broker filing the entry. Shipping from Canada doesn't remove the need to file. Under a CBP interim final rule effective January 5, 2027 (91 FR 69977), a non-US importer of record (for example your Chinese company or a Canadian partner entering parts in its own name) must be CTPAT-validated or use a CTPAT-validated licensed broker; check this before planning entries in a foreign company's name.
  • Canadian side. Non-controlled goods exported to the US don't need a Canadian export declaration (CBSA D20-1-1).
  • Getting Canadian duty back. Duty paid when the part entered Canada can be refunded under the drawback program, applied for within 4 years; for exports to the US and Mexico, CUSMA limits drawback, so have the broker work out the amount. GST isn't refunded through drawback; GST/HST registrants claim input tax credits. Most robot parts enter Canada duty-free anyway, so this mostly matters for dutiable items such as battery packs.

Case 2: US warehouse to a Canadian customer

  • Chinese-origin parts enter Canada at the MFN rate (China lost the General Preferential Tariff on January 1, 2015). In the 2026 Customs Tariff, robot parts under 8479.90.90.10, motors, power supplies and controllers are mostly duty-free; a lithium-ion battery imported on its own under 8507.60.90 is 7%. Canada's 2024 surtax order on Chinese goods now covers only steel and aluminum in Chapters 72, 73 and 76, not robots or Chapter 84/85 parts.
  • GST and provincial tax. GST is 5% of the value for duty plus duty and any surtax; in BC, PST of 7% may have to be self-assessed depending on use. GST/HST registrants can usually claim it back as input tax credits.
  • US-origin parts need one more check. Canada's United States Surtax Order, 2026 (SOR/2026-186) has, since September 8, 2026, put surtaxes of 15%, 25% or 50% on listed goods of US origin, and CUSMA status doesn't exempt them. Schedule 1 includes 8428.70.00 industrial robots at 15%; headings 8479 and 8507 are not listed. Chapter 98 goods (including the repair items 9992 and 9993) and US goods returning to Canada after repair are exempt. Check each tariff item against the schedules before shipping a US-made robot or part north. CBSA's customs notice CN 25-19 (revised November 9, 2026) says the US surtax remission order also covers surtax under the 2026 order, including some manufacturing machinery and parts; whether a given robot qualifies is for your broker to confirm.
  • Getting US duty back. Goods imported into the US and exported unused to Canada can qualify for drawback of up to 99% of duties paid under 19 U.S.C. 1313(j)(1), and exports in the same condition to Canada are not subject to the CUSMA "lesser of the two duties" limit (19 CFR 182.45(b)); export and claim within 5 years of import. CBP says the 2018 Section 301 duties are eligible for drawback. We found no official statement on whether the 2026 forced labor duties are.

Case 3: repair across the border and back

A Canadian customer's failed part, repaired in the US, back to Canada

  • Duty: tariff item 9992.00.00 lets goods repaired or altered in the US, Mexico and certain other free trade partners return to Canada duty-free, regardless of country of origin and whether or not the repair is under warranty (CBSA D8-2-26, D8-2-10). A Chinese-made motor board repaired in the US comes back duty-free.
  • GST: 9992 doesn't relieve GST. A warranty repair where the warranty covers all parts and labour comes back GST-free; a non-warranty repair that qualifies pays GST only on the value of the work done abroad (including added parts); otherwise GST is on the full value for duty.
  • When it leaves: non-controlled goods exported for repair and returning to Canada don't need an export declaration, whatever their value (D20-1-1, reason code NDR10); form BSF407 can be used to identify goods leaving temporarily. On return, present the repair invoice and proof of export (customs or transport documents, an exporter's declaration) with make, model and serial number. Without them, CBSA may charge on the full value.

A US customer's failed part, repaired in Canada (for example Vancouver), back to the US

  • Into Canada for repair: temporary import under 9993.00.00, usually on form BSF865, for up to 18 months (extensions possible). Goods imported only for repair, with no change of ownership and exported promptly, are relieved of GST for 12 months. For goods that are not CUSMA-originating (a Chinese part, for example) CBSA may ask for security. An ATA Carnet can't be used for repairs (CBSA D8-1-1).
  • Back into the US: HTSUS 9802.00.40 (warranty) and 9802.00.50 (other repairs) normally charge duty on the value of the repair, but goods repaired in Canada or Mexico come back free of normal duty whether or not they are goods of Canada (US Note to Chapter 98, Subchapter II). You need the repairer's declaration (no substitution, repair only) and the importer's declaration under 19 CFR 10.8.
  • The 2026 tariff still applies: the Section 301 forced labor duty from July 24, 2026 is charged on the value of the repair for goods entered under 9802. For a Chinese-origin part repaired in Canada, have the broker confirm whether it applies and on what base.

What doesn't count as repair

CUSMA Article 2.8 is explicit: work that destroys a good's essential characteristics, creates a new or commercially different good, or turns an unfinished good into a finished one is not a repair or alteration, and the duty-free return doesn't apply. Upgrading an old model into a new one, or replacing most of an assembly during a repair, should be cleared with the broker first. And if the unit you send back is a different serial number from the one that came in ("we couldn't fix it, so we sent a new one"), customs sees a new import, not a repair.

Spare parts can't be "temporarily imported"

A common idea: bring spares into Canada as a temporary import, send back what isn't used, and pay nothing. CBSA Memorandum D8-1-1 says no: goods imported for sale, or as spare parts for a repair service, don't qualify for 9993.00.00, even if you expect not to use them and will export the unused ones. Its example is computer parts brought in by a technician who isn't sure what caused the fault. The options are a formal import (duty paid), with duty drawback on parts later exported under D7-4-2, or a licensed customs bonded warehouse. Tools and test equipment that a technician carries across for a service visit are a different matter: an ATA Carnet or CUSMA Article 2.7 temporary admission of professional equipment may fit.

Paperwork to keep for every crossing

DocumentWhenWatch out for
Commercial invoice with country of origin, tariff number and valueEvery crossingFree warranty parts still need a value; origin is where the part was made
Part number to serial number listRepairs and high-value modulesThe unit that left must be the unit that comes back
Proof of exportWhen a part leaves for repairCanada: transport documents, exporter's declaration or BSF407. US: CBP Form 4455 is commonly used to register articles exported for repair
Repair invoice and repairer's declarationWhen a repaired part returnsWhat was done, parts and labour priced separately; warranty repairs still show a value
CUSMA certification of originOnly for goods that really qualifyDon't certify Chinese parts
Dangerous goods documents for lithium batteriesBatteries shipped alone or inside equipmentDamaged batteries can't go by air (see return to manufacturer, batteries section)
Import recordsEvery shipmentUS 5 years, Canada 6 years

Where to keep the stock: one warehouse for both countries, or one each

  • Ship from China to each country separately. Each part is imported once and the rules stay simple. The cost is two safety stocks. While the installed base is small, keep a few fast movers on each side and keep expensive modules in one place, moving them across when needed.
  • One warehouse serving both. Every transfer is another import, with the extra US tariffs and the paperwork each time. Before choosing this, work out how much Section 301 duty the US share will pay, and how much duty paid in the other country can be drawn back and who will file for it.
  • Bonded options. In a licensed Canadian customs bonded warehouse, duty and GST are deferred for up to 4 years and paid only on what is released into Canada. The US has bonded warehouses and foreign-trade zones too; whether they pay off for robot spares, given how Section 301 goods are treated in a zone, is the subject of our Chinese article 美国保税仓和 FTZ 放机器人备件划算吗. One trap to know: exporting from a US bonded warehouse to Canada or Mexico counts as a withdrawal for consumption (19 CFR 144.38(b)), and FTZ exports to Canada can fall under the same USMCA duty-deferral rule (19 CFR 182.53) unless the goods leave in the same condition.
  • Batch the failed parts. Group failed parts by country and send them monthly or quarterly to the factory or repair site. That saves broker fees per shipment and keeps the paperwork in one place.

Common mistakes

  • "It ships from Canada, so it's CUSMA." Origin follows production. Chinese parts don't qualify.
  • Issuing a CUSMA certification for Chinese parts. Goods that don't meet the rules of origin can't claim preference, and certifications are audited; records must be kept 5 years in the US and 6 in Canada.
  • Sending a repair out as an ordinary export. Without proof of export, the part can pay full duty when it comes back.
  • Returning a different unit. A new unit sent back in place of the repaired one is a new import, not a repair.
  • Importing spares as temporary imports. D8-1-1 rules it out.
  • Using an old rate sheet. In 2026 the US ended the IEEPA tariffs, applied a temporary 10% Section 122 tariff (February 24 to July 23) and then the Section 301 forced labor duties; Canada added a new surtax on US goods in September. A quote from six months ago is probably wrong.

What KeepRobots can do

KeepRobots is a robot field service company in Vancouver, starting from Greater Vancouver with on-site visits across Canada and to the US. We don't build robots and we are not an exclusive agent for any brand; in Canada we also sell robots from selected brands (Booster Robotics and SENAD, see our robot shop), and we service robots of any make. We are not an importer of record or a customs broker; clearance and drawback go through a licensed broker. Around spare parts and repairs on both sides of the border, we can:

  • Hold parts and failed units: store your spare parts, spare robots and failed parts awaiting repair in Vancouver, inspect on arrival and keep in/out records by part number and serial number, so the broker has what it needs for the paperwork.
  • Swap and repair locally: diagnose, swap and test on site following your fault trees and repair authorization; what can be fixed in Canada doesn't have to cross the border.
  • Tag and batch failed parts: label, photograph and log fault and serial number, then pack batches to your forwarder's and broker's requirements.
  • Work in Chinese and English: our engineers read Chinese technical documents and can join calls during China working hours.

Current rates, before tax: diagnostic C$200 in Canada or US$200 in the US, per robot, per visit, credited if you approve the repair; C$100 call-out in the Greater Vancouver core zone; on-site labour C$150/hour in Canada or US$150/hour in the US; travel outside the core zone and for US projects quoted per project. See North American field service for robot makers, or write to partners@keeprobots.com with the model, the installed base and cities on each side, and how you hold spares today.

FAQ

Can Chinese-made robot spare parts stored in Canada enter the US duty-free under CUSMA (USMCA)?

No. CUSMA origin depends on where the part was produced, not where it ships from. Storage, labelling and picking are not production, so a part made in China is still of Chinese origin (CUSMA Articles 4.2 and 4.18; 19 CFR 134.1 and 102.11). It pays normal US duty plus the tariffs on Chinese goods. Assembling a robot in Canada from Chinese parts might meet a tariff-shift rule, but get an advance ruling first.

Which extra US tariffs apply to Chinese robot parts in late 2026?

As of November 15, 2026: the 2018 Section 301 tariffs (25%; List 1 includes 8479.50 robots and robot parts now under 8479.90.95; non-EV lithium-ion batteries 8507.60 at 25% from 2026), plus the Section 301 forced labor duty of 12.5% on goods of China from July 24, 2026. Parts on the Section 232 steel derivatives list, such as 8479.90.95, pay the 232 duty (15% combined for fixed industrial machinery) instead of the 12.5% layer when steel is at least 15% of their weight. IEEPA tariffs ended in February 2026, and the robotics Section 232 proclamation of October 28, 2026 (Proclamation 11077) added no tariff for now. Confirm with a broker on the day.

Is a robot part repaired in the US and returned to Canada subject to Canadian duty?

Usually not. Tariff item 9992.00.00 lets goods repaired in the US, Mexico and certain other free trade partners return to Canada duty-free, regardless of origin and of warranty status (CBSA D8-2-26). GST still applies unless the warranty covers all parts and labour; qualifying non-warranty repairs pay GST on the value of the work abroad. Keep proof of export and the serial number, and present the repair invoice on return.

What does a US customer pay when a robot part is repaired in Canada and sent back?

Into Canada, the part can enter temporarily under 9993.00.00 (form BSF865, up to 18 months). Back into the US, 9802.00.40/.50 normally charge duty on the repair value, but goods repaired in Canada or Mexico return free of normal duty regardless of origin, with the repairer's and importer's declarations under 19 CFR 10.8. The Section 301 forced labor duty from July 24, 2026 is charged on the repair value for 9802 entries; have your broker confirm it for Chinese-origin parts.

Can robot spare parts be imported into Canada temporarily and sent back if unused?

No. CBSA Memorandum D8-1-1 says goods imported for sale, or as spare parts for a repair service, don't qualify for 9993.00.00, even if you expect not to use them. Import them formally and claim drawback on parts later exported (D7-4-2, within 4 years), or hold them in a licensed customs bonded warehouse, where duty and GST are deferred for up to 4 years.

What can KeepRobots do for cross-border spare parts, and what does it cost?

We are not an importer of record or a customs broker. We can hold your spare parts, spare robots and failed parts in Vancouver with records by part and serial number; swap and repair on site following your fault trees, so parts that can be fixed in Canada don't cross the border; and tag, photograph and batch failed parts for your forwarder and broker. Current rates, before tax: diagnostic C$200 in Canada or US$200 in the US, per robot, per visit, credited if you approve the repair; C$100 call-out in the Greater Vancouver core zone; labour C$150/hour in Canada or US$150/hour in the US; travel outside the core zone and US projects quoted per project.

中文版:机器人备件美加之间怎么调拨:原产地、关税、修理复进口和单证

Sources (checked 2026-11-15)

  • CUSMA text, Chapter 4 (rules of origin, Annex 4-B): international.gc.ca
  • CUSMA text, Chapter 2 (Article 2.7 temporary admission, Article 2.8 goods re-entered after repair): international.gc.ca
  • CUSMA text, Chapter 5 (certification of origin, records): international.gc.ca
  • 19 CFR 134.1, country of origin and substantial transformation: ecfr.gov
  • 19 CFR 102.11, origin rules for goods of CUSMA countries: ecfr.gov
  • 19 CFR Part 182, USMCA (182.12 certification, 182.15 records, 182.45 drawback): ecfr.gov
  • 19 CFR 10.8, articles exported for repair or alteration: ecfr.gov
  • 19 CFR 190.31, unused merchandise drawback: ecfr.gov
  • USITC, Harmonized Tariff Schedule of the United States (Chapters 84, 98, 99): hts.usitc.gov
  • USTR Section 301 List 1, 83 FR 28710 (June 20, 2018): govinfo.gov
  • USTR four-year review modifications, 89 FR 76581 (September 18, 2024): federalregister.gov
  • USTR Section 301 forced labor action (July 28, 2026): federalregister.gov
  • USTR extension of 178 Section 301 exclusions to January 9, 2027 (FR Doc. 2026-22925): federalregister.gov
  • White House, robotics and industrial machinery Section 232 proclamation (October 28, 2026): whitehouse.gov
  • Proclamation 11077, robotics and industrial machinery, 91 FR 69199 (November 2, 2026): federalregister.gov
  • US Supreme Court, Learning Resources v. Trump (February 20, 2026): supremecourt.gov
  • CBP, de minimis suspension interim final rule, 91 FR 37789 (June 24, 2026): govinfo.gov
  • CBP interim final rule on non-resident importers of record, 91 FR 69977: federalregister.gov
  • CBP, drawback and trade remedies FAQ: cbp.gov
  • CBSA Memorandum D8-2-10, goods repaired outside Canada: cbsa-asfc.gc.ca
  • CBSA Memorandum D8-2-26, tariff item 9992.00.00: cbsa-asfc.gc.ca
  • CBSA Memorandum D8-1-1, temporary importation (tariff item 9993.00.00): cbsa-asfc.gc.ca
  • CBSA, duty drawback: cbsa-asfc.gc.ca
  • CBSA Memorandum D20-1-1, export reporting: cbsa-asfc.gc.ca
  • CBSA Memorandum D11-4-2, CUSMA proof of origin: cbsa-asfc.gc.ca
  • CBSA Customs Tariff 2026, Chapter 84: cbsa-asfc.gc.ca
  • United States Surtax Order, 2026 (SOR/2026-186): gazette.gc.ca
  • CBSA Customs Notice CN 26-23, United States Surtax Order, 2026: cbsa-asfc.gc.ca
  • China Surtax Order (2024), SOR/2024-187: laws-lois.justice.gc.ca
  • CBSA Customs Notice CN 25-19, United States Surtax Remission Order (revised November 9, 2026): cbsa-asfc.gc.ca
  • Rules and rates are as of 2026-11-15 and can change; this page is general information, not customs, tax or legal advice. KeepRobots is not a customs broker or importer of record. Rates are KeepRobots' current published rates, before tax, and may change.

← Field notes

Want a local service point in North America?

Tell us your product, where your customers are and what you need. We reply within one business day, in English or Chinese.